|
T-4600
Embossed tin
25 ga. steel
9 1/2" wide, sold by the foot.
$6.00
|
|
T-2200
Steel sheet, 27 ga.
10" wide x 14" high, use for patching areas on your trunk or for the bottom plate.
$4.00
|
 |
B-4215
Brass lid lift.
4 1/8" wide x 1 1/4" high
$2.50
|
|
B-4927
Brass roller
3 3/16" high x 7/8" wide
$6.00
|
|
S-4907
Steel roller, small.
1 13/16" long
$4.00
S-4917
Steel roller, large.
2" long
$8.00
|
|
D-4956
Brass plated bottom stud.
2" long.
$2.00
|
|
W1-4090
Plain hardwood slat w/quarter round edges.
36" long x 2 1/4"wide x 1/4" thick.
$10.00 |
|
W1-4091
Fluted hardwood slat w/quarter round edges.
36" long x 2 1/4"wide x 1/4" thick.
$10.00
|
|
Zap/CA super thin penetrating adhisive super glue.
Zap/CA is very thin, penetrating, and instant curing. One or two drops are all that's necessary. It's wicking action allows assembly prior to gluing. Hold parts toghtly together and apply a drop of "Z" to the outside of the seam. It penetrates into the joint and cures in 10-15 seconds.
G-6881, 1 oz. bottle, $10.00
G-6891, 2 oz. bottle, $16.00
G-6871, 4 oz. bottle, $27.00
|
|
Zap-A-Gap, thick, gap filling instant super glue.
Zap-A-Gap is thicker and slower to set, allowing more assembly time. It is a great gap filling adhesive for those jobs with spaces or cracks of less than 1/16". Apply the glue then place the parts together. Or dribble into the crack. Good for cracks in trunk bodies and tightening corners.
G-6882, 1 oz. bottle, $10.00
G-6892, 2 oz. bottle, $16.00
G-6872, 4 oz. bottle, $27.00
|
|
Slo Zap, thick, slow curing super glue.
This thick glue is often used as a filler. It is best for those jobs where assembly time is required, allowing 30-40 seconds (or longer) of positioning time. Cures in 1-2 minutes or longer, depending on the amount used. Can take up to 24 hours to completely cure. Use Zip-Kicker to accelerate cure time when needed.
G-6880, 1 oz. bottle, $10.00
G-6890, 2 oz. bottle, $17.00
|
|
G-6893, 2 oz bottle
Zip-Kicker, handy pump bottle has a special formula designed to instantly set the surface of the Zap glues. Just spray on. (Note: the glue will still need to be allowed its full cure time.)
$8.00
|
|
S-4640
Stamped steel ornament.
1 7/8" dia.
$1.00
|
|
B-4629
Stamped brass ornament.
1/2" dia.
$1.00
|
|
H-4141
Paper interior decorative edging with Crack 'n Peel backing. Comes on a sheet with Four corners
Black and red over cream background.
$6.00
H-4142
Paper interior decorative edging with Crack 'n Peel backing.
Strip: 1" wide x 26" long.
Black and red over cream background.
$1.50
|
|
H-4143
Paper interior decorative edging with Crack 'n Peel backing. Comes on a sheet with Four corners
Blue and gold over cream background.
$6.00
H-4144
Paper interior decorative edging with Crack 'n Peel backing.
Strip: 1" wide x 26" long.
Blue and gold over cream background.
$1.50
|
 |
S-4830
Steel stay.
7 1/16" long x 7/8" wide.
$6.50
S-4840
Steel stay.
8 1/2" long x 1 3/16" wide.
$8.00
S-4850
Steel stay.
10 7/8" long x 1 3/16" wide.
$8.50
|
 |
D-4828
Brass plated steel stay.
6 3/4" long x 1" wide.
$4.00
D-4836
Brass plated steel stay.
8" long x 1" wide.
$8.50
|
|
Cloth stay material.
1" wide x continuous roll.
Sold by the yard: $3/yd.
No minimum.
E-7519
Dark blue interwoven with red and beige.
E-7518
Green beige stripe.
E-7509
Black.
E-7500
White.
|
|
R-2000 Rivet Kit
Use this kit for attaching metal stays to your trunk.
For info on using this kit go to: Install a stay.
$2.00 per kit.
|
|
Fiebing Leather Dyes
We are offering the finest leather dye that you can buy. These are sold in 4 fl oz bottles and come with an applicator. Great for coloring and antiquing handles, straps, and leather edging.
4 oz. bottle of black dye.
$6.50
4 oz. bottle of brown dye.
$6.50
4 oz. bottle of dark red dye.
$6.50
|
| |
|
